Storm Water Treatment Systems

 

A FULL STORM WATER TREATMENT SYSTEM IN ONE UNIT
 ONE HOLE – ONE UNIT -ONE COST

 

Test Results: 100% Gross Pollutants, 86% Sediments and Nutrients & 99.95% of Oil from Storm Water

 

INSTALLED IN JUST A FEW HOURS

STORMWATER POLLUTION CONTROL SYSTEMS

The Enviro Australis (EA) offer easy to install, low maintenance storm water treatment systems, so cost savings are easily achieved. Accurate system selection is quick, easy and guaranteed using EA’s online portal. Manufacture and assembly are available in all states and production is scalable for rapid or high volume delivery, so lead times are short.

The Enviro Series systems are far more effective than a traditional Gross Pollutant Trap (GPT), so one Enviro system can replace an entire treatment train. Enviro Australis guarantee that all storm water treatment systems are compliant with current EPA legislation and water-sensitive urban design (WSUD) best practice. So this gives builders and engineers, complete assurance when specifying and installing the Enviro Series Systems.

Watch the E - Series animated video

Watch the H Series separating oil from water

ABOUT ENVIRO AUSTRALIS

Enviro Australis is an Australian company that designs, manufactures and markets technologies designed to reduce gross pollutants, sediments, nutrients and oil from storm water. All of the Enviro Australis systems are compliant with EPA legislation and Water Sensitive Urban Design (WSUD) best practice. As a result, you are compliant with legislation and avoid risk of prosecution. So all systems protect project designers, builders and owners, due to the 100-year service life, and superior performance and stability of the technology.

Enviro Australis systems are compliant with global environmental guidelines including:

– NJDEP (New Jersey Department of Environmental Protection)
– eWater
– ARQ (Australian Run-off Quality Guidelines)
– SQIDEP (Stormwater Quality Improvement Devices Evaluation Protocol)

All Enviro Australis systems are designed and manufactured in Australia.

NEED HELP?

Selecting the most appropriate ENVIRO pollution control model is essential. The basic steps in selection a model are:

  1. Determine if a catchment is a high impact area
  2. Examine the sensitivity of receiving waters
  3. Calculate the drainage pipe size and match a model
  4. Check the adequacy of pre-set treated flow
  5. Check flow velocity
  6. Finally, confirm your selection with an Enviro Engineer

For more information, or help in choosing a model, view our selection guide or give us a call.

Want More Information?

Want to know more or need help choosing a compliant system for your project?
Complete the contact form below and we will help you with more information.